Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-FormBoardOutlineCreationBoard Outline Creation Successful_AD
Created: июля 28, 2015 | Updated: июня 16, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Вы просматриваете версию 17.0. Для самой новой информации, перейдите на страницу PCB_Dlg-FormBoardOutlineCreation((Board Outline Creation Successful))_AD для версии 21
The Board Outline Creation Successful dialog.
Summary
When defining the board shape based on an existing 3D body, this dialog allows users to adjust the board outline's alignment. As well, DRC checking for the model part can be disabled and hidden.
Access
From 3D mode in the PCB Editor, select Design » Board Shape » Define from 3D body from the toolbar. After running the command, select a 3D body on the board to open the dialog.
Options/Controls
- Hide and disable DRC checking for the model part - This option is selected by default. De-select the option if you do not wish for DRC checking to be overridden.
- Modify model height - Select the option desired for determining how the 3D model is aligned with the board. The options are:
To align face with top PCB board surface,To align face with bottom PCB board surface, orDo not modify model position.
