Working with the Minimum Solder Mask Sliver Design Rule on a PCB in Altium Designer

您正在阅读的是 15.1. 版本。关于最新版本,请前往 Working with the Minimum Solder Mask Sliver Design Rule on a PCB in Altium Designer 阅读 21 版本
Applies to Altium Designer version: 15.1
 

Rule category: Manufacturing

Rule classification: Binary

Summary

This rule helps identify narrow sections of solder mask that may cause manufacturing problems at a later stage. Ensuring that there is a minimum width of solder mask across the board, this rule checks the distance between any two solder mask openings to ensure that they are equal to or greater than the user-specified value. This includes the pads, vias, and any primitives that reside on solder mask layers. It also checks Top and Bottom sides independently.

Constraints

Default constraint for the Minimum Solder Mask Sliver rule.

Default constraint for the Minimum Solder Mask Sliver rule.

  • Minimum Solder Mask Sliver - specifies the minimum allowed width of solder mask.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expressions match the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

可用的功能取决于您的 Altium Designer 软件订阅级别

Content