Dlg-ImportMCADBaselineImport MCAD Baseline_AD

現在、バージョン 19.1. をご覧頂いています。最新情報については、バージョン Dlg-ImportMCADBaseline((Import MCAD Baseline))_AD の 22 をご覧ください。
Applies to Altium Designer versions: 19.0, 19.1, 20.0, 20.1 and 20.2

The Import MCAD Baseline dialog
The Import MCAD Baseline dialog

Summary

The Import MCAD Baseline dialog is used to Import an IDX file (MCAD Baseline.idx). This file type is used for collaborating between ECAD and MCAD domains. Altium Designer facilitates this collaboration using the Mechanical CAD Collaboration extension, which is necessary to access this dialog.

Access

From the PCB Editor, click File » Import » MCAD IDX Baseline from the main menus.

The Mechanical CAD Collaboration extension (shown below) must be installed to access this dialog.

The extension can be found on the Purchased tab of the Extensions & Updates page (accessed by using the  drop-down at the top-right of the workspace then choosing Extensions and Updates).

Options/Controls

  • Input MCAD Baseline File - click  to browse for and select the desired IDX file to be imported.
  • Output PCB File - click  to browse for and select the desired PCB file into which proposed changes are to be synchronized.
Once the MCAD Baseline IDX file has been imported, collaboration proceeds through the Mechanical CAD Collaboration panel. For more information, see IDX Support.
注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。