PCB_Dlg-MoveRoom_AskUserDlgRoom containing No Net - Locked Objects_AD

現在、バージョン 19.1. をご覧頂いています。最新情報については、バージョン PCB_Dlg-MoveRoom_AskUserDlg((Room containing No Net - Locked Objects))_AD の 22 をご覧ください。
Applies to Altium Designer versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

The Room containing No Net / Locked Objects dialog
The Room containing No Net / Locked Objects dialog

Summary

The Room containing No Net / Locked Objects dialog allows you to confirm which objects attached to a room to move when moving a room.

Access

This dialog can be accessed in the following ways:

  • From the main menus, select Design » Rooms » Move Room then click on a room.
  • Right-click on a room in the workspace then select Room Actions » Move Room from the context menu.
For this dialog to appear, the Ask when moving rooms containing No Net/Locked Objects option must be enabled on the PCB Editor - General page of the Preferences dialog.

Options/Controls

  • No Net Objects - enable to move objects with no nets with the room.
  • Locked Objects - enable to move locked objects with the room.
  • Don't ask me about moving room's locked/no net objects until next PCB session (use currently selected settings) - enable this option to save the selected settings and continue using them for the rest of your PCB session. The dialog will not open again unless a new session is started.
注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。