Altium Designer Documentation


Created: 28.11.2017 | Updated: 28.11.2017
Вы просматриваете версию 21. Для самой новой информации, перейдите на страницу для версии 22

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to convert a selected Extruded/Cylindrical/Spherical 3D Body object to a STEP model. Use this feature when the design includes an Extruded 3D Body object that needs to be rotated. The STEP model is automatically embedded in the design file.

For more information on 3D Body Objects, refer to the 3D Body page.


This command is accessed from the PCB Editor by choosing the Convert To STEP command from the right-click context menu.


First, ensure that the Extruded/Cylindrical/Spherical 3D Body that you wish to convert is selected within the design workspace. Right-click on the object and select the Convert To STEP command from the context menu.

After launching the command, the selected primitive will be converted to an embedded STEP object. This change of state will be reflected in the Properties panel.


  1. Edited a converted object’s properties, as required, through the Properties panel (when the object is selected).
  2. Only a single selected object can be converted. If there are multiple objects selected in the workspace (or no objects selected), the command will not appear in the context menu.
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: