Working with the Parallel Segment Design Rule on a PCB in Altium Designer

您正在阅读的是 17.1. 版本。关于最新版本,请前往 Working with the Parallel Segment Design Rule on a PCB in Altium Designer 阅读 21 版本
Applies to Altium Designer versions: 17.0 and 17.1
 

Rule Category: High Speed

Rule Classification: Binary

Summary

This rule specifies the distance two track segments can run in parallel, for a given separation.

Routed Differential Pair nets are excluded from checking by this rule.

Constraints

Default constraints for the Parallel Segment rule.

Default constraints for the Parallel Segment rule.

  • Layer Checking - specifies where the two track segments to be checked should reside:
    • Same Layer - the track segments for the targeted nets are both on the same layer
    • Adjacent Layers - the track segments for the targeted nets are on adjacent layers.
  • For a parallel gap of - specifies the parallel gap that should exist between two track segments before they can be considered for test.
  • The parallel limit is - specifies the maximum permissible parallel length of two track segments (on different nets), when the parallel gap constraint is observed over the entire length.

How Duplicate Rule Contentions are Resolved

Duplicate rules do not create contentions for this rule.

Rule Application

Online DRC and Batch DRC.

Tips

  1. This rule tests track segments, not collections of track segments. Apply multiple parallel segment constraints to a net to approximate crosstalk characteristics that vary as a function of length and gap.

可用的功能取决于您的 Altium Designer 软件订阅级别

Content