PCB_Dlg-AutopositionComponent Text Position_AD

現在、バージョン 20.1. をご覧頂いています。最新情報については、バージョン PCB_Dlg-Autoposition((Component Text Position))_AD の 22 をご覧ください。
Applies to Altium Designer versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

The Component Text Position dialogThe Component Text Position dialog

Summary

The Component Text Position dialog allows you to quickly set the location of the designator and/or comment text strings for one or more selected components.

Access

The dialog is accessed from the PCB Editor by clicking Edit » Align » Position Component Text from the main menus while the component(s) whose designator and/or comment text you want to position are selected in the workspace.

Options/Controls

The dialog presents sections for defining the positional style for both Designator and Comment independently of each other. In each case, use the radio buttons arranged around a section's component graphic to choose the required positional style for the text in relation to its parent component. Each of these is an autoposition style, meaning that the text will remain in the chosen position as the component is moved and rotated. To leave text in its current position with no modification, leave the No Change option enabled.

The following positional styles are available and correspond to the entries in the Autoposition field in the Properties region of the Properties panel in Parameter mode:

  • Left-Above
  • Left-Center
  • Left-Below
  • Center-Above
  • Center
  • Center-Below
  • Right-Above
  • Right-Center
  • Right-Below

 

注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。