Created: 27.04.2021 | Updated: 14.05.2021
Вы просматриваете версию 21. Для самой новой информации, перейдите на страницу для версии 22

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to optimize component rotation from 360 to 0 degrees.


This command is accessed from the PCB Editor by choosing the Tools » Optimize Component Rotation command from the main menus.

This command is automatically enabled by the PCB:CleanUp.OptimizeComponentRotation option in the Advanced Settings dialog.


After launching the command, the rotation of 360 degrees will be displayed as 0 degrees. Documents that contain components that were changed by these means will be marked as modified in the Projects panel and a message will appear in the Messages panel detailing the change.

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: