Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-EqualizeNetsOptionsFormEqualize Nets_AD
Created: July 28, 2015 | Updated: June 17, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Now reading version 15.1. For the latest, read: PCB_Dlg-EqualizeNetsOptionsForm((Equalize Nets))_AD for version 22
The Equalize Nets Dialog.
Summary
The Equalize Nets dialog is used to match the length of nets identified by the Matched Net Lengths design rule. Before launching the dialog, make sure you have set up a Matched Net Lengths design rule, covering the nets whose length you wish to equalize.
Access
The Equalize Nets dialog can be accessed by clicking Tools » Equalize Net Lengths.
Options/Controls
- Style - Specify the corner style for the tracks. Options include
90 Degrees,45 Degrees, andRounded. - Gap - Specify the gap between two adjacent tracks.
- Amplitude - Specify the tuning amplitude when equalizing nets.
