Altium Designer 文档
...
对话框参考
Dialogs((G to L))_AD
HSEdit_Dlg-HoleSizeEditorHole Size Editor_AD
Created: 七月 28, 2015 | Updated: 六月 18, 2017
| Applies to versions: 15.1, 16.0, 16.1 and 17.0
您正在阅读的是 17.0. 版本。关于最新版本，请前往 HSEdit_Dlg-HoleSizeEditor((Hole Size Editor))_AD 阅读 17.1 版本
The Hole Size Editor dialog.
Summary
The Hole Size Editor dialog allows designers to specify hole size settings. Existing hole sizes are listed in the left plane of the dialog.
Access
In PCB Editor, select Tools » Legacy Tools » Legacy Hole Size Editor from the main menu to access this dialog.
Options/Controls
Include
- Pads - Enable this option to include pads when hole sizes are being updated on the current board.
- Vias - Enable this option to include vias when hole sizes are being updated on the current board.
Unit - Specify the unit for the hole size. Two options are available: Imperial and Metric.
Edit - Click this button to open the Edit Hole Size dialog and edit the hole size for an existing, selected pad or via from the Hole Sizes list. Multiple pads and/or vias can be selected and simultaneously edited.
