PCB_Dlg-ChangeDifferentialPairDifferential Pair_AD
Created: 7月 28, 2015 | Updated: 4月 13, 2018
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
現在、バージョン 17.1. をご覧頂いています。最新情報については、バージョン PCB_Dlg-ChangeDifferentialPair((Differential Pair))_AD の 21 をご覧ください。
The Differential Pair dialog.
Summary
The Differential Pair dialog allows designers to define differential pairs for PCB tracks.
Access
In the PCB panel, select the Differential Pairs Editor mode. Double-click on an existing differential pair or click Add or Edit to access the dialog.
Options/Controls
- Positive Net - Shows the positive (+) net in the current differential pair. Differential pairs use a naming convention that requires the relevant nets to use a common prefix, followed by a consistent positive/negative suffix, e.g.,
TX0_PandTX0_N. Click the arrow to view and select a net. Click in the field to edit the net name and add your positive suffix. - Negative Net - Shows the negative (-) net in the current differential pair. Differential pairs use a naming convention that requires the relevant nets use a common prefix, followed by a consistent positive/negative suffix, e.g.,
TX0_PandTX0_N. Click the arrow to view and select a net. Click in the field to edit the net name and add your negative suffix. - Name - Shows the current name for this differential pair. Edit this field to create or modify the name.
