Working with the Component Orientations Design Rule on a PCB in Altium Designer

Вы просматриваете версию 15.1. Для самой новой информации, перейдите на страницу Working with the Component Orientations Design Rule on a PCB in Altium Designer для версии 21
 

Rule category: Placement

Rule classification: Unary

Summary

This rule specifies allowable component orientations. Multiple orientations are permitted, allowing the Autoplacer to use any of the enabled orientations.

Constraints

Default constraints for the Component Orientations rule.

  • Allowed Orientations– the chosen orientations that are made available for use by the Cluster Placer. The following orientation-based options are available:
    • 0 Degrees – allows the Autoplacer to rotate a component to the 0° orientation.
    • 90 Degrees – allows the Autoplacer to rotate a component to the 90° orientation.
    • 180 Degrees – allows the Autoplacer to rotate a component to the 180° orientation.
    • 270 Degrees – allows the Autoplacer to rotate a component to the 270° orientation.
    • All Orientations – allows the Autoplacer to rotate a component to any of the four individual orientations.

In each case, rotation is relevant to the orientation of the component in the source library.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

During autoplacement with the Cluster Placer.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Content