Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 18.0
2120.220.120.019.119.018.118.017.117.016.116.015.1
Close
Поиск Search on Documentation

Working with the Nets to Ignore Design Rule on a PCB in Altium Designer

Created: октября 10, 2017 | Updated: сентября 26, 2019 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Вы просматриваете версию 18.0. Для самой новой информации, перейдите на страницу Working with the Nets to Ignore Design Rule on a PCB in Altium Designer для версии 21

Rule category: Placement

Rule classification: Unary

Summary

This rule specifies which nets should be ignored.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

None, the rule applies to all nets targeted by the scope (Full Query).

How Duplicate Rule Contentions are Resolved

Contentions are not possible.

Rule Application

Not currently observed by the DRC tool.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.