PCB_Dlg-Reconnect_OptionsFormSubnet Connector_AD
Created: 六月 07, 2017 | Updated: 二月 23, 2018
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
您正在阅读的是 18.0. 版本。关于最新版本，请前往 PCB_Dlg-Reconnect_OptionsForm((Subnet Connector))_AD 阅读 22 版本
The Subnet Connector dialog
Summary
The Subnet Connector dialog provides controls to specify the maximum subnet separation.
Access
The dialog is accessed by clicking Route » Add Subnet Jumpers from the main menus.
Options/Controls
- Maximum Subnet Separation - enter a value for the maximum subnet separation (100mil is the default value) of incomplete routing segments.
- Run - click to automatically add subnet connectors to complete short routing segments (tracks that still have connection lines in between) on the current PCB document.
