Working with the Modified Polygon Design Rule on a PCB in Altium Designer

Вы просматриваете версию 15.1. Для самой новой информации, перейдите на страницу Working with the Modified Polygon Design Rule on a PCB in Altium Designer для версии 21
 

Rule category: Electrical

Rule classification: Unary

Summary

This rule detects polygons that are still shelved and/or have been modified, but have not yet been repoured.

Constraints

Default constraints for the Modified Polygon rule.

  • Allow shelved - if enabled, all polygons that fall within the scope of this design rule, and that are currently shelved, will not be flagged as a violation.
  • Allow modified - if enabled, all polygons that fall within the scope of this design rule, and that are currently modified but have not been repoured, will not be flagged as a violation.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Content