PCB_Dlg-Reconnect_OptionsFormSubnet Connector_AD

現在、バージョン 20.1. をご覧頂いています。最新情報については、バージョン PCB_Dlg-Reconnect_OptionsForm((Subnet Connector))_AD の 22 をご覧ください。
Applies to Altium Designer versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

The Subnet Connector dialog
The Subnet Connector dialog

Summary

The Subnet Connector dialog provides controls to specify the maximum subnet separation.

Access

The dialog is accessed by clicking Route » Add Subnet Jumpers from the main menus.

Options/Controls

  • Maximum Subnet Separation - enter a value for the maximum subnet separation (100mil is the default value) of incomplete routing segments.
  • Run - click to automatically add subnet connectors to complete short routing segments (tracks that still have connection lines in between) on the current PCB document.
注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。