Altium NEXUS Documentation


Created: June 10, 2016 | Updated: April 11, 2017
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to clear the selected object(s) from the current document and copy them to the CAMtastic Editor's clipboard.


This command can be accessed from the CAMtastic Editor by:

  • Choosing the Edit » Cut command from the main menus.
  • Clicking the  button on the CAMtastic Standard toolbar.
  • Using the Ctrl+X keyboard shortcut.


After launching the command, the cursor will change to a square and you will enter cut mode. You will be prompted to select objects to include in the cut. Simply position the cursor over an object you wish to include in the selection and click. Clicking away from an object allows you to drag a selection area, for including multiple objects in the selection. Selection is cumulative.

Continue adding objects to the selection and then right-click to effect the cut and exit cut mode. The selected objects will be cleared from the workspace and copied to the CAMtastic Editor's clipboard.


  1. Objects copied to the clipboard using this command cannot be pasted into the same document from which they were cut.
  2. The command can be canceled at any stage before the right-click by pressing Esc.
  3. Altium NEXUS does not use the Windows clipboard for normal cut operations in CAM documents. Instead, a separate internal clipboard is maintained for this document type. Also, the internal CAMtastic Editor clipboard is entirely independent of the internal clipboards used by other Altium NEXUS editors. You can only cut and paste between CAM documents.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: