Altium NEXUS Documentation

MillSortNone

Created: June 11, 2016 | Updated: April 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: CommandMode=NC

Summary

This command is used to clear any drill sort/optimize option that has previously been applied. The NC Drill machine will then drill the holes according to the order in which they were originally created.

Access

This command is accessed from the CAMtastic Editor by choosing the View » Sort/Optimize Options » None command from the main menus.

Use

After launching the command, any previously applied sort order/optimization (e.g. User Select, or Automatic) will be cleared, and the drilling order will be returned to the original order in which the drill points were created.

Tips

  1. The order in which the NC Drill machine will actually drill the holes, can be previewed using the Preview Drill/Rout command.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: