Altium NEXUS Documentation

ViewSetLayOn

Created: June 11, 2016 | Updated: April 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to access the Set Layers ON dialog, from where you can specify which layers you wish to turn ON.

Access

This command is accessed from the CAMtastic Editor by using the Alt+K keyboard shortcut.

Use

After launching the command, the Set Layers ON dialog will appear. Use this dialog to control exactly which layers you wish to turn ON. You can specify individual layers, or layer ranges, separated by commas. For example, to turn ON layers 2, 6, and layers 9 through 15, you would enter:

2,6,9-15

You can also specify layers that you don't want to be included, using the exclamation mark as a prefix. Using the above example, if you did not really want to turn ON layers 11 and 12, you would enter:

2,6,9-15,!11-12

Leave the field blank if you want to turn all layers ON.

Tips

  1. You can selectively turn layers ON in the CAMtastic panel, by checking the checkbox next to a layer's entry in the Layers list. To turn all layers ON from the panel, right-click anywhere in the Layers list and choose the All ON command from the context menu. Alternatively, select a layer in the list and use the Right Arrow keyboard shortcut.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: