Altium NEXUS Documentation

InspectReportsRout

Created: June 11, 2016 | Updated: April 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to generate a rout/mill report for the current document.

Access

This command is accessed from the CAMtastic Editor by choosing the Reports » Rout/Mill command from the main menus.

Use

After launching the command, a rout/mill report (Rout.rpt) will be generated and opened as the active document in the main design window. The report lists all defined rout/mill paths for the current document with tool numbers, sizes, number of instances for each tool, and the distance of each routing/milling path.

Tips

  1. The report is generated and saved automatically in the \Users\<ProfileName>\AppData\Roaming\Altium\Altium NEXUS <GUID>\CAMtastic folder of your software installation. The report will appear in the Projects panel as a free document.
  2. All measurement information uses the current units for the workspace - either inches or millimeters. Units can be changed either from the CAMtastic panel, or the CAM Editor - Drawing Modes page of the Preferences dialog.
  3. Generating a new report will overwrite an existing report of the same name without warning.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: