Altium NEXUS Documentation

EditSwapLayers

Created: June 11, 2016 | Updated: April 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to quickly move data between the layers of the current document.

Access

This command is accessed from the CAMtastic Editor by choosing the Edit » Layers » Swap Layers Data command from the main menus.

Use

After launching the command, the Swap Layers Data dialog will appear. The dialog presents all currently defined layers in the document, in Before swap and After swap columns. Initially, these columns are identical listings, which means that no movement of data will occur. If you want to move the data from one layer to another, simply identify the source layer in the Before swap column, then in the corresponding row of the After swap column, click within the Layer Name field, and choose the target layer to which the data should be moved. Do this for all layers that you want to move data from.

After the swapping is configured as required, click OK - for each configured swap, the data will be moved from the source layer to the nominated target layer.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: