Altium NEXUS Documentation

CAMTASTIC_Cmd-ViewSetLayOffViewSetLayOff_AD

Created: June 11, 2016 | Updated: April 11, 2017
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to access the Set Layers OFF dialog, from where you can specify which layers you wish to turn OFF.

Access

This command is accessed from the CAMtastic Editor by using the K keyboard shortcut.

Use

After launching the command, the Set Layers OFF dialog will appear. Use this dialog to control exactly which layers you wish to turn OFF. You can specify individual layers, or layer ranges, separated by commas. For example, to turn OFF layers 2, 6, and layers 9 through 15, you would enter:

2,6,9-15

You can also specify layers that you don't want to be included, using the exclamation mark as a prefix. Using the above example, if you did not really want to turn OFF layers 11 and 12, you would enter:

2,6,9-15,!11-12

Leave the field blank if you want to turn all layers OFF.

Tips

  1. You can selectively turn layers OFF in the CAMtastic panel, by unchecking the checkbox next to a layer's entry in the Layers list. To turn all layers OFF from the panel, right-click anywhere in the Layers list and choose the All OFF command from the context menu.
  2. To tun OFF all layers bar one, select the layer in the panel that you wish to remain ON, and use the Left Arrow keyboard shortcut.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: